Cold Aluminum Roofing Gutter Roll Forming Machine High Precise And
Machine consist of uncoiler and its base, coil sheet guiding
equipment, roll forming system, post cutting equipment, pressing
equipment, post-cutting system,hydraulic station, controlling
system, supporter table.
2. High-solid forming stand guarantees the goods and uniform high
quality of final productd
3. The operation automatically minimizes the tolerance of cutting
1. A stylish and attractive design, giving the apperance of a
traditional roof tile.
2. Resistant to frost, heat,hail and gales; 100% waterproof, due to
the lateral run-off channel on each sheet for several models.
3.The raw material can be in different color, with elegant and
noble looking. It is widely used as the garden like factory, hotel,
exhibition, villa,civil construction etc.
|No.||main parameter of Aluminum Roofing Gutter Cold Roll Forming Machine|
|1||Suitable to process||Color steel plate|
|2||Width of the plate||333mm|
|6||Thickness of the plate||0.3-0.6mm|
|8||Material of the cutting blade||Cr12|
|9||Diameter of the roller||Φ66mm|
|11||Voltage||380V 50Hz 3phases|
|12||Control system||PLC control|
The Chart of Process Flow:
manual uncoiler - roll forming machine - computer control system -
hydraulic control system - cutting system - output table
Components and Technical Specification
1. Manual Uncoiler
Usage:It is used to support the steel coil and uncoil it in a
turnable way. The steel coil is uncoiled by hand. Loading
Inner diameter: 500-508mm
2. Feeding Table
Put the raw material(steel plate) through the beach to manufacture
and process, it can guarantee that the products are neat, parallel
and everything is uniformity. Please refer to the equipment
regulation to know the function of locate angle iron.
3. Hydraulic System
Power:4kw,Hydraulic oil: 40#
hydraulic oil into the hydraulic oil tank ,the pump drive the
cutter machine to begin the cutting job.
4.Computer Control Cabinet
The target piece`s length is adjustable and digit of it can be
adjusted. Computed mode has two modes: automatic and manual one.
The system is easy to operate and use.
It adopts the hydraulic drive and automatic location to decide the
dimension and cut the target products.
Material of blades: Cr12,quenching treatment
It adopts welded steel and supported roller to transmit the
products,which is used to collect the finished products.